Spline Drive

Spline Drive takes a new approach to pump and accessory drives which use Gilmer, HTD or V-Belts. A splined mandrel provides positive drive with the following advantages:
• Splined Drive mandrel
• Pulley stack retained by nut
• Stock length bolt used to retain damper in most applications
• Billet mandrel hub available for most dampers
• Complete line of splined pulleys, spacers, and guide washers
• Billet V-belt pulleys available for most applications
• Light weight, aircraft grade aluminum construction

Drive Sets
Small Block Chevy/ATI/MSD

06-4111 3 Bolt Spline Drive Hub

Big Block Chevy/ATI/MSD

06-4112 3 Bolt Spline Drive Hub

Ford/ATI/MSD

06-4113 3 Bolt Spline Drive Hub
06-4114 4 Bolt Spline Drive Hub

Fontana Midget

06-4160 3 Bolt Spline Drive Hub

 

Spline Drive Hub & Cap Washers
Peterson’s new Spline Drive requires washers on the hub and cap for belt retention and pulley alignment. Caps and hubs include one size washer but we also offer the washers separate for changes in pulley diameters giving a cost effective solution for a drive change.

06-0711 Guide Washer 2.250” x 1/8”
06-0712 Guide Washer 2.750” x 1/8”
06-0713 Guide Washer 3.250” x 1/8”
06-0714 Guide Washer 3.500” x 1/8”

 

Drive Caps
Standard Length
06-0726 Drive Washer Cap, 2.250”
06-0727 Drive Washer Cap, 2.750”
06-0728 Drive Washer Cap, 3.250”
06-0729 Drive Washer Cap, 3.500”
06-0730 Drive Washer Cap w/Nut, 2.250”
06-0731 Drive Washer Cap w/Nut, 2.750”
06-0732 Drive Washer Cap w/Nut, 3.250”
06-0733 Drive Washer Cap w/Nut, 3.500”

2.250” Length
06-0770 Drive Washer Cap, 2.250”
06-0771 Drive Washer Cap, 2.750”
06-0772 Drive Washer Cap, 3.250”
06-0773 Drive Washer Cap, 3.500”
06-0760 Drive Washer Cap w/Nut, 2.250”
06-0761 Drive Washer Cap w/Nut, 2.750”
06-0762 Drive Washer Cap w/Nut, 3.250”
06-0763 Drive Washer Cap w/Nut, 3.500”

 

Mandrel Spacers
06-0739 1/8” Spacer
06-0740 1/4” Spacer
06-0741 3/8” Spacer
06-0742 1/2” Spacer
06-0743 3/4” Spacer
06-0744 1” Spacer
06-0746 1 1/4” Spacer

Hub Spacers
06-4211 .250” SBC Spacer
06-4212 .375” SBC Spacer
06-4213 .500” SBC Spacer
06-4214 .625” SBC Spacer
06-4215 .750” SBC Spacer
06-4222 .375” BBC Spacer
06-4242 .375” SBF Spacer

Stack Adapters
06-0726 2.200 OD
06-0727 2.700 OD
06-0722 3.200 OD
06-0723 3.500 OD

Gilmer Pulleys
06-0204 14 tooth .560” Wide
06-0206 16 tooth .560” Wide
06-0214 14 tooth 1” Wide
06-0216 16 tooth 1” Wide
06-0217 17 tooth 1” Wide
06-0218 18 tooth 1” Wide
06-0219 19 tooth 1” Wide
06-0221 21 tooth 1” Wide
06-0226 26 tooth 1” Wide

HTD Pulleys
06-1218 18 tooth 1” Wide
06-1219 19 tooth 1” Wide
06-1220 20 tooth 1” Wide
06-1221 21 tooth 1” Wide
06-1222 22 tooth 1” Wide
06-1223 23 tooth 1” Wide
06-1225 25 tooth 1” Wide
06-1233 33 tooth 1” Wide

V-Belt Pulleys
06-0529 2.5” Single
06-0530 3.5” Single

 


Modular Serpentine Drive
Our modular serpentine water pump drive delivers 5 combinations in one drive assembly. By switching around components this drive can be set to any of the popular lengths to line up with your water pump. Provides a 30% reduction.

06-1501 Serpentine WP Drive w/ Drive Nut Cap
06-1502 Serpentine WP Drive x/ Smooth Cap

 

Blower Spline Drive Hub
The blower drive hub is a great addition to our popular spline drive line. Features a positive register that works with most popular blower drive pulleys. Accepts any of our spline drive pulleys and accesories. Spline pulleys sold separately so you can customize your setup.

06-4116-001 Spline Drive Blower Hub

 

 

 

IMCA Spline V-Belt Pulley
Peterson’s new v-belt spline combo pulley for IMCA style cars allows an easy, drive solution. Features Billet aluminum construction, hard anodize for durability and splined front section for oil pump drive.

06-0501 2V 5.5” Dia Short SBC
06-0510 2V 5.85” Dia Short SBC

06-5000 1V 5.5" Diameter

 

 

 

 

 

 

 

Home | Dealers | Tech | Contact | About Us | Site Map
Pumps | Drives | Tanks | Filters | Engine | Fittings

Copyright Peterson Fluid Systems Inc.
Pumps Drives Tanks Filters Engine Fittings