| Oil Pump Options
Peterson Fluid Systems offers several options on our pumps incluidng Rear Drive, Dual Feed Pressure body, Lightened Rotors, 45º & 90º Fittings, and mount style. |
|
|
|
Dual Feed Pressure Section Our Dual Feed Pressure body features a pressure section that can provide enough flow for todays oil hungry high performance engines. By utilizing a completely internal dual flow to the rotor we can increase flow numbers to supply the needs of your engine. Most applications will not even need a change in plumbing configurations to switch to this style pressure section. It still only requires a single inlet line to the pump. Sometimes a change to a -16AN line and pickup may be required.
|
| Rear Drive Peterson
pumps are all available with a rear drive option. This allows any
of the popular power steering, fuel pump or combination pumps to
be mounted and driven off of the pump shaft. |
|
| Lightened Rotors We have lightweight rotors available for the weight concious racer. Removes a full pound from a 5 Stage pump.
|
|
45º & 90º Fittings Certain applications may require a hose come off the pump at an angle without the room for a standard hose end. We offer pump fittings in a 45º and 90º to make these tight applications possible.
|
|
Mount Style Peterson pumps come in several different mount confiurations. We have left and right side engine mounts, as well as, bellhousing and cam mounts. Bellhousing mounts fit Bert/Brinn style bellhousings. Adapters are availble for the Tilton style as well. Cam mounts will mount direct to Meziere covers and we have mount plates for other applications. |
|
Home
| Dealers | Tech | Contact
| About Us | Site Map
Pumps | Drives
| Tanks | Filters
| Engine | Fittings