Plumbing

AN Wrenches

Peterson's fitting wrenches are machined from billet aluminum and anodized. Short length makes for easy access to hard to reach fittings and keeps from over tightening the fitting.

16-1000	5 Piece Wrench Set
16-1006	-6 AN Wrench
16-1008	-8 AN Wrench
16-1010	-10 AN Wrench
16-1012	-12 AN Wrench
16-1016	-16 AN Wrench
16-1020	-20 AN Wrench 2" Hex Earls Hose End
16-1021	-20 AN Wrench 1 3/4" Aeroquip Hose End

Click to enlarge

Oil Flow Meter

A great addition to any dyno. This flow meter is installed inline and reads oil flow from 2 - 30 GPM. -12 AN female port inlet and outlet.

16-1050 Oil Flow Meter

Click to enlarge

Oil - Water Heat Exchanger

Efficency of this type of cooler is 30 - 50% better than an airflow cooler. The oil cooler can be placed within the structure of the racecar, keeping it from being damaged in frontal collisions. Aluminum construction.

10-2257 Water neck spacer, -10 AN fititng for water source

15-9010 Heat Exchanger, -12 fittings - 15" x 4 1/2" x 6 3/8"

15-9020 Heat Exchanger, 1 3/4" Water Hose x 1" NPT oil

15-9021 Heat Exchanger, -12 AN Water Hose x 1" NPT oil

Competition Oil Coolers

These oil coolers are produced with the finest of aircraft quality aluminum components and are heli arc welded for durability. Designed for wet or dry sump systems, these coolers have superior flow capacity with very low pressure drop. Coolers are designed with an integral mounting flange.

15-9000 Oil Cooler 5" x 15" x 3 1/8"- Use for engines up to 200 hp and transmissions or rear ends, 2 ea. -10 AN fittings.

15-9001 Oil Cooler 8" x 15" x 3 1/8"- Use for engines up to 400 hp 2 ea. -12 AN fittings. 2 ea 1/2" NPT female bungs.

15-9002 Oil Cooler 11" x 15" x 3 1/8"- Use for engines up to 550 hp and transmissions or rear ends, 2 ea. -12 AN fittings.2 ea 1/2" NPT female bungs.

|Ball Valves|Fittings|Misc.|Back to Top