 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ball Valves
& Inline Ports
Inline
Ball Valves
Peterson
Fluid Systems has produced the best shutoff valve in the racing industry.
Produced from
aircraft quality aluminum, these valves utilize hardcoated aluminum balls and bodies along with Teflon seals. Available in several combinations, these valves make fuel and oil shut off easy.
tPanel Mount
Peterson has
redesigned its popular ball valve as a panel mount valve.
Inline Mechanical Temperature Port AssemblyPeterson's inline temperature sender fitting assembly has a standard 5/8-18 threaded port for a mechanical temperature probe.
Inline Electrical Temperature Port AssemblyPeterson's inline temperature sender fitting assembly has a standard 1/8" NPT threaded port for a electrical temperature probe.
Inline Mechanical Temperature Port Assembly w/ Spraybar PortPeterson's
now combines two of our popular inline units into one. This inline
temp port assembly now also
|
Click
to enlarge
k
Click
to enlarge
| 09-1850 | -10 AN x -10 AN Nose |
| 09-1851 | -10 AN x -10 AN Bulkhead |
| 09-1852 | -10 AN Push On x -10 AN Push on |
| 09-1853 | -10 AN x -10 AN B-Nut |
| 09-1855 | -10 AN x -10 AN Port w/nut |
| 09-1870 | -12 AN x -12 AN Nose |
| 09-1871 | -12 AN x -12 AN Bulkhead |
| 09-1872 | -12 AN Push On x -12 AN Push on |
| 09-1873 | -12 AN x -12 AN B-Nut |
| 09-1875 | -12 AN x -12 AN Port w/nut |
to enlarge
Spraybar Distribution Block
Peterson's
inline spraybar distribution block allows easy connection of valve
cover spraybar lines to the main oil line.
Available in many fitting configurations. Comes complete with 2 ea.
-4 AN male fittings for spraybar hose connections.
| 09-3940 |
-10AN x -10AN Nose |
| 09-3941 |
-10AN x -10AN Bulkhead |
| 09-3960 |
-12AN x -12AN Nose |
| 09-3961 |
-12AN x -12AN Bulkhead |
Click to enlarg
Inline Return Line Assembly
Peterson's
inline return line assembly allows fuel system return lines to be
put back into the fuel system
inlet line rather than returning to the tank. The assembly incorporates
an internal diffuser tube which
keeps aeration to a minimum and keeps the return line fluid from disrupting
the main line flow.
Complete with 2 ea. -6 AN return line fittings.
| 09-2940 | -10AN x -10AN Nose |
| 09-2941 | -10AN x -10AN Bulkhead |
| 09-2942 | -10AN Push On x -10AN Push on |
| 09-2943 | -10AN x -10AN B-Nut |
| 09-2960 | -12AN x -12AN Nose |
| 09-2961 | -12AN x -12AN Bulkhead |
| 09-2962 | -12AN Push On x -12AN Push on |
| 09-2963 | -12AN x -12AN B-Nut |
|