R4 Wet Sump Pumps

Our Wet Sump Pumps are built around our Patent Pending 4 lobe rotor which provides excellent oil pressure and flow in excess of 30 GPM on the High Volume pump for the highest need motors.

Bellhousing Mount

04-1056 Bellhousing Mount w/Rear Drive. High Volume. Fits Bert, Brinn & QuarterMaster.

Mount Blades

14-0700 Bert/Brinn Bellhousing

R4 Bellhousing Dry Sump Pump

The Bellhousing mount R4 features 1.2" thick scavenge rotors with a 1.4" high volume pressure rotor to supply oil to even the most demanding motor. Larger 1.4" thick scavenge rotors can be installed to run higher vacuum. Rear drive for powersteering pumps or combo powersteering/fuel pumps comes standard.

3 Stage

04-3056 3 Stage Single Ret, HV Press, RD

04-3057 3 Stage Dual Ret, HV Press, RD

4 Stage

04-4056 4 Stage Single Ret, HV Press, RD

04-4057 4 Stage Dual Ret, HV Press, RD

5 Stage

04-5056 5 Stage Single Ret, HV Press, RD

04-5057 5 Stage Dual Ret, HV Press, RD

Mount Blades

14-0700 Bert/Brinn Bellhousing

Drive Sets

Modular Serpentine Drive

Our modular serpentine water pump drive delivers 5 combinations in one drive assembly. By switching around the pieces this drive can be setup in any of the popular lengths needed. Provides a 30% reduction.

06-1501 Serpentine WP Drive w/Drive Nut Cap
06-1502 Serpentine WP Drive w/Smooth Cap
4050239YGY Serpentine Belt

400 Series Oil &Fuel Filter

Peterson's 400 series filters provide the best filtering available for fuel or oil. Features include anodized billet aluminum body and end caps for durability and resistance to fluid corrosion., stainless steel mesh screen and a pleated element for high flow.

45 Micron Filter - Fuel

With Bypass	Without Bypass
09-0475 -8 AN fittings	09-0482 -8AN fittings
09-3475 -8 Wiggins	09-3482 -8 Wiggin
09-0476 -10 AN fittings	09-0483 -10 AN fittings
09-3476 -10 Wiggins	09-3483 -10 Wiggins
09-0477 -12 AN fittings	09-0484 -12 AN fittings
09-3477 -12 Wiggins	09-3484 -12 Wiggins

 

60 Micron Filter - Fuel/Oil

With Bypass	Without Bypass
09-0450 -8 AN fittings	09-0456 -8AN fittings
09-3450 -8 Wiggins	09-3456 -8 Wiggin
09-0451 -10 AN fittings	09-0457 -10 AN fittings
09-3451 -10 Wiggins	09-3457 -10 Wiggins
09-0452 -12 AN fittings	09-0458 -12 AN fittings
09-3452 -12 Wiggins	09-3458 -12 Wiggins
09-0453 -16 AN fittings	09-0459 -16 AN fittings
09-3453 -16 Wiggins	09-3459 -16 Wiggins

 

75 Micron Filter - Oil

With Bypass	Without Bypass
09-0430 -8 AN fittings	09-0436 -8AN fittings
09-3430 -8 Wiggins	09-3436 -8 Wiggin
09-0431 -10 AN fittings	09-0437 -10 AN fittings
09-3431 -10 Wiggins	09-3437 -10 Wiggins
09-0432 -12 AN fittings	09-0438 -12 AN fittings
09-3432 -12 Wiggins	09-3438 -12 Wiggins
09-0433 -16 AN fittings	09-0439 -16 AN fittings
09-3433 -16 Wiggins	09-3439 -16 Wiggins
09-0426 -20 AN fittings	09-0425 -20 AN fittings
09-3424 -20 Wiggins	09-3425 -20 Wiggins

 

100 Micron Filter - Oil

With Bypass	Without Bypass
09-1430 -8 AN fittings	09-1436 -8AN fittings
09-4430 -8 Wiggins	09-4436 -8 Wiggin
09-1431 -10 AN fittings	09-1437 -10 AN fittings
09-4431 -10 Wiggins	09-4437 -10 Wiggins
09-1432 -12 AN fittings	09-1438 -12 AN fittings
09-4432 -12 Wiggins	09-4438 -12 Wiggins
09-1433 -16 AN fittings	09-1439 -16 AN fittings
09-4433 -16 Wiggins	09-4439 -16 Wiggins
09-1426 -20 AN fittings	09-1425 -20 AN fittings
09-4426 -20 Wiggins	09-4425 -20 Wiggins

700 Series Fuel Filter

Our small fuel filters are available as an inline or carbuerator version. These compact fuel filters feature a 60 micron reusable stainless steel screen filter. Filters are machined from billet aluminum and then red anodized for use with all types of fuel.

09-0720 -6 AN Inline Fuel Filter

09-0722 -8 AN Inline Fuel Filter

09-0701 -8 AN B-Nut Holley

09-0702 -8 AN Nose Holley

09-0714 -6 AN B-Nut Long Holley

09-0715 -6 AN Nose Long Holley

09-0711 -8 AN B-Nut Long Holley

09-0712 -8 AN Nose Long Holley

09-0751 -8 AN B-Nut Long Demon/Braswell

09-0752 -8 AN B-Nut Long 3/4-16 Braswell

DLM Fuel Filter

Our Dirt Late Model Fuel Filter features lightweight aluminum construction, hardcoat anodizing for durability and a 60 Micron stainless steel element. available in -8 through -12AN inlet. Compatible with all fuels.

09-1608 -8 Fuel Filter

09-1610 -10 Fuel Filter

09-1612 -12 Fuel Filter

09-0891 60 Micron element

09-1689 Rebuild oring kit

Power Steering Reservoir w/Filter

Peterson's Power Steering Resevoir features lightweight billet aluminum construction, hardcoat anodizing for durability and a full quart capacity. the best part is the internal 100 micron stainless steel, cleanable element to provide superior filtering to extend steering box or rack life. Independentyl proven to reduce fluid temperatures by 30 degrees.

08-0480 Reservoir w/100 Micron Element

09-0895 100 Micron Element

08-0490 Mount bracket for 1 1/4" Tube

08-0490 Mount bracket for 1 1/4" Tube

08-0490 Mount bracket for 1 1/4" Tube

08-0490 Mount bracket for 1 1/4" Tube

08-0494 Mount bracket for firewall

Dirt Late Model Tank

Peterson's Dirt Late Model tanks feature the most advanced oil tank design available. They include a built in oil filter which keeps the tanks clean of engine debris and helps on deaeration of the engine oil. Our new "center breather" system allows the air to escape out the bottom of the tankwhile leaving the oil where it belongs. No more messy breathers and blowing oil! An oil heater bung in the bottom allows the use of a probe style heater for pre heating. Available in either standard or lay down filter box for easy maintenance.

08-0911-DB 9" Dirt Late Model Tank w/std filter
08-0911-CJR 9" Dirt Late Model Tank w/laydown filter

Custom Oil Tanks

Peterson can produce oil tanks for your special application. We have produced tanks for racing teams around the world, as well as, OEMs, supercar builders, military, industrial companies, and aerospace companies. We work off of your drawings while also consulting you on what would be best for oil control and supply.

Remote Breather Cans

Peterson remote breather cans with internal baffeling are excellent when breathing your dry sump tank to atmosphere or running a vacuum system.

08-0400 Peterson Spun Aluminum Complete with 2 ea. -12 AN female ports and -6 AN drain plug. Use oil tank fittings for hose attatchment.

08-0410 Peterson Spun Aluminum Complete with 1 ea. -12 AN male fitting for oil tank breather and 1 each -8 AN male fitting to breath rear end. Complete with quick drain valve and mounting clamp. Internally baffled.

Rear End Fill Can

Our rear end fill can features a ventilated cap and aluminum construction. It is also available with an integrated filtered fuel tank vent which is exclusive from the vented rear end. Fuel tank vent fitting available in a -6 or -8 AN.

08-0430 Rear end Fill Can

08-0440 Rear End Fill Can w/fuel tank vent